2008 Hot Products Catalog

127 INTAKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL JET WORKS ADJUSTABLE WATER RESTRICTOR Allows user to adjust flow on any 3/8” ID waterline. A great product for fine tuning engine/exhaust temperature for maximum power. Description Part No. Adjustable Water Restrictor JWR-01 RIVA RACING ALUMINUM THRU HULL CONNECTORS Riva Racing’s aluminum thru hull fittings are anodized to prevent corrosion. Available in 3/8” and 1/2” waterline applications. Description Part No. 3/8” Thru Hull Connector RY1013-TH-3/8 1/2” Thru Hull Connector RY1013-TH-1/2 JET WORKS QUICK DISCONNECT WATER RESTRICTOR Description Quick DisconnectWater Restrictor 3/8” Quick DisconnectWater Restrictor 1/4” Part No. QD-38 QD-14 Features finemesh stainless filter screen that is threaded to accept Mikuni main jet (not included) for water restriction.Allows removal of restrictive filter screen in water distributionmanifold of single, twin and triple exhaust systems, providing increased cooling water tomotor. RIVA EXHAUST STINGER WATER FILTER/RESTRICTOR Description Exhaust Stinger Water Filter/Restrictor 3/8" Part No. RY15-SF38 JET WORKS FLOW CONTROL VALVE Description Standard Flow Control Valve 3/8” Pro Flow Control Valve 3/8” Pro Flow Control Valve 1/4” Part No. 52-3118 52-3119 52-3122 Description 1/2” Water Line Strainer 3/8” Water Line Strainer #20 Mesh Replacement #40 Mesh Replacement (#40 is finer than #20) Part No. 56-9010 56-9011 10486 10485 WATER STRAINER The Water Strainer is a must to trap all sand, shell, and vegetation particles. No more clogged water lines!! Height=2” (51mm) Footprint= 2-1/2” (64mm) - Round 2-1/2” 65mm 3-7/8” 100mm Description Part No. Waterline Inline Filter COMFTG036 FOR FACTORY PIPE CHAMBER WATERLINE QD-38 comes with 4/3/2mm restrictor inserts used for controlling water flow through exit passes, stinger, head pipes, etc. QD-14 is for use with Mikuni Jets (not included), and allows quick change in small increments of water flow. The Flow Control Valve provides improved throttle response and much quicker starts by drying out your waterbox at low rpm and idle speeds. Tests have shown an average acceleration improvement of 10 feet over a non-equipped model in the first 50 feet. The Flow Control Valve allows unrestricted water flow to the Stinger for better top speed.Yet it controls the amount of water at low speeds for better response. It also allows for an easier tuning of the Carburetors. It does not interfere with normal engine or exhaust pipe cooling and is compatible with all electronic water injection systems. Race Legal for All Classes. Two Models are available. Both are adjustable. The Standard Flow Control Valve is preset at 3.5 p.s.i. and is adjusted by adding the supplied stainless steel shims to increase the spring tension. The Pro-Series is externally adjustable by turning the outer housing by hand. Pressure can be tested with pop off gauge. All PWC w/OEM or aftermarket exhaust systems (except Yamaha’s w/OEM exhaust) LOW PROFILE WATER STRAINERS Smaller water strainers. Ideal for using with water injection or tight space. Height: 2-3/8” (60mm) Footprint: 1-3/8” (35mm) - Round 2006 W ORLD F INALS • L AKE H AVASU , AZ P HOTO C OURTESY OF J IN O MURA Description 3/4” Water Line Strainer for Sea Doo 4-Stroke 1/2” Water Line Strainer 3/8” Water Line Strainer #20 Mesh Replacement #40 Mesh Replacement (#40 Mesh is finer than #20 Mesh) Part No. 56-9004 56-9005 56-9006 20420020 20420040