2008 Hot Products Catalog

40 INTAKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL R&D UNIVERSAL FUEL PRESSURE REGULATOR Universal bypass fuel pres- sure regulator for carbureted or EFI fuel systems applica- tions. Base fuel pressure is adjustable from 20 to 60 PSI with high pressure spring (installed). Ideal for carbureted and EFI bypass applications where more flow and superior pressure control are desired. R&D offers two types of fuel pressure regulator set ups. Part #801-25010 will come completely assembled with #4 fittings ready for R&D custom hoses with #4 AN fittings for a nice high performance hot rod look. Part #801-25009 will have brass 3/8” to 1/4” barb 90 degree fittings installed for use with push on type hose and Otekier style clamps for security. R&D offers a high performance Coast Guard approved fuel hose that can be purchased by the foot (Part #611-27502), as well as the Otekier style clamps (Part #611-27518). The universal type bypass style regulator is capable of handling any fuel pump up to 250 GPH. Replace “Deadhead” regulator performance and experience full flow volume and steady fuel pressure. R&D offers a mounting bracket (Part #801-25011) that specifically mounts the fuel pressure regulator on top of the inner cooler. This location allows the R&D custom fuel lines to route perfectly. Description Part No. A. R&D Fuel Pressure Regulator Barb Style 801-25009 B. R&D Fuel Pressure Regulator 801-25010 AN Style (pictured above) C. R&D Ultra 250X Mounting Bracket for Fuel 801-25011 Pressure Regulator R&D ULTRA 250X FUEL LINE KITS R&D fuel lines are produced using high performance billet anodized AN fittings coupled to Type A SAE J 1527 US Coast Guard Approved fuel line. All Ultra 250 fuel lines are cut to specific length and pre-assembled to ensure a perfect seal, custom fit, and that awesome hot rod look. Description Part No. Rail to Regulator 611-27513 Regulator to Tank with Standard 611-27514 Tank Bulkhead Fitting Kit Regulator to tank with Standard Tank Vent Fitting 611-27515 Regulator to Fuel Gauge 611-27516 Type A SAE J 1527 US Coast Guard Approved 611-27502 1/4" Fuel Line - Sold per foot. 1/2” Otekier Style Clamps 611-27518 R&D ULTRA 250X FUEL GAUGE ADAPTER FOR TESTING AND TUNING R&D Fuel Gauge Adapter allows you to mount the fuel pressure gauge directly to the fuel pressure regu- lator. Description Part No. R&D Ultra 250X Fuel 611-27517 Gauge Adapter *Sold by the set only B ULTRA 250X • FUEL INJECTION CONTROLLERS & REGULATORS R&D ULTRA 250X FUEL RAIL RETURN LINE ADAPTER FITTING R&D offers a unique Fuel Rail Return Line Adapter fitting which will allow quick and easy connections of high performance fuel pressure regulators or fuel pressure gauges. The R&D Fuel Rail Fitting has the O.E.M. tapered metric thread pitch for easy bolt on assembly (no tapping required) installation. The R&D Fitting is available in two types, part number 611-27499 for barb type push on hose connections, and part number 611-27500 for #4 AN type connections. R&D has complete line up of fuel pressure regulators, fuel gauge and fuel hose accessories, all that meet I.J.S.B.A. and APBA. Description Part No. Barb Style (Fuel rail fitting) 611-27499 AN Style (Fuel rail fitting) 611-27500 R&D UNIVERSAL #4 AN FUEL RETURN LINE FITTING ADAPTER KIT The R&D Universal Fuel Return Line Adapter Fitting can be installed into the top of any fuel tap assembly by finding a clear area on top of the fuel tap system large enough to install the fitting. Drill a 15/32 or #56 (.468) drill size hole and install the fitting using the kit supplied aluminum seal washer on each side of the fitting. The R&D universal fuel return fitting kit is the safest and cleanest way to properly install a fuel return to the top of any make or model fuel tap assembly. Kit comes with one #4 AN bulkhead fitting, one # 4 AN bulkhead nut, and two #4 AN 7/16" Aluminum washers. Description Part No. R&D Bulkhead Fuel Return Line Fitting 611-27501 R&D ULTRA 250X DEEP FUEL PICKUP The R&D Deep Fuel Pickup is designed to maximize fuel volume. The stock fuel pickup is located horizontally in the gas tank three inches above the bottom of the tank. This leaves approximately 5 gallons of unusable fuel in the bottom of the tank. The R&D Deep Fuel Pickup relocates the stock fuel pickup to the bottom of the tank in a vertical position. The new positioning allows for 24 percent more riding time per tank of gas. The deep fuel pickup is an absolute must for offshore racing. Description Part No. R&D Ultra 250X/LX Deep Fuel Pick Up 801-25100 611-27500 611-27499 AN STYLE BARB STYLE