2009 Hot Products Catalog

INTAKE SYSTEMS SEA DOO 4 STROKE ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL SEA DOO RXP RXP-X RXT RXT-X • SUPERCHARGER RIVA HEAVY-DUTY 04-07 RXP/RXT/GTX SC SUPERCHARGER CLUTCH WASHERS These are direct replacements for the original clutch washers that are prone to fail on modified engines. Precision machined from tool grade steel to increase durability. Will not break up and damage engine at end of service life. Description Part No. Riva Clutch Washers RS1751-HDW-945 ‘04-05 RXP/RXT/GTX SC Riva Clutch Washers RS1751-HDW-946* ‘06-07 RXP/RXT/GTX SC *Note: RS1751-HDW-946 must be used with 2006 style Sea Doo OEM Supercharger shaft Part #420881946 RIVA HEAVY-DUTY 08 RXP-X/RXT-X 255HP 08 RXP/RXT/GTX-SC 215HP SUPERCHARGER CLUTCH WASHERS These are direct replacements for the original clutch washers that are prone to fail on modified engines. Precision machined from tool grade steel to increase durability. Will not break up and damage engine at end of service life. NOTE: BRP recommends that you replace the Supercharger shaft/clutch assembly when servicing your supercharger. Order part# 420881100 (`08 spec). Requires `08 spec Heavy-duty Clutch Washers (part# RS1751-HDW-948). Description Part No. Riva Clutch Washers RS1751-HDW-948 ‘08 255hp RXP-X/RXT-X & 215hp RXP/RXT/GTX-SC R&D SUPERCHARGER HIGH PERFORMANCE CLUTCH WASHER KIT The R&D High Performance Supercharger Clutch Washer Kit is a direct replacement upgrade for the very fragile factory BRP O.E.M. ceramic clutch washers that are and prone to fracture and disintegrate, which can result in costly engine damages. The R&D High Performance Clutch Kit is manufactured from a high strength, wear resistant bronze alloy material that has a yield strength of 32,000 psi plus, and a Rockwell hardness of B95. The R&D Superclutch was designed to improve reliability without disin- tegrating under the Sea Doo superchargers high rpms, heat and is designed to not only but also increase boost by decreasing clutch slippage. Description Part No. R&D Clutch Washer Kit 06-07 RXP/RXT 215* 613-95001 *NOTE: (or any supercharger rebuilt or warranted with a BRP rebuild kit part #420881946 or #420881947) NOTE: BRP#420881946 is for 215 engines, and #420881947 is for 185 engines. R&D Clutch Washer Kit 03-04 GTX 185 S/C 613-95002 04-05 RXP 215, 05 RXT 215 *NOTE: BRP supercharger rebuilt kit installed, upgraded, or warranty updated with the BRP rebuild kits #420881947 (for 185) or #420881946 (for 215), these upgrad- ed superchargers will require R&D PART # 613-95001 R&D Clutch Washer Kit 613-95006 08 RXP/RXT 215HP & RXP-X/RXT-X 255HP RIVA CERAMIC SEA DOO SUPERCHARGER BEARINGS These precision-built Ceramic S/C Bearings provide greatly reduced heat build up and less rolling resistance. Superior surface finish of the ceramic balls reduces friction and significantly increases bearing life. These are a great upgrade when replacing your clutch washers or rebuilding your supercharger. Set includes two bearings & complete installation instructions. Made in the USA. Description Part No. Riva Supercharger Bearings RS1750-CB-420 All 185HP & 215HP Sea Doo Supercharged Engines RXP-X/RXT-X SUPERCHARGER BEARING KIT The R&D Supercharger Bearing kit is a precision OEM replacement bearing. Bearing changes are recommended when rebuilding the supercharger or changing the clutch washers. Available summer of 2009. Description Part No. R&D RXP-X/RXT-X Supercharger Bearing Kit 613-95010 RXP-X/RXT-X SUPERCHARGER 16 TOOTH GEAR Normal clutch wear with OEM and aftermarket Steel clutch washers will typically have unwanted galling on the clutch surfaces of the gear. The new R&D OEM Replacement supercharger gear (not available from Sea Doo) enables the supercharger clutch assembly to be rebuilt to OEM specifications without the expensive purchase of the entire Sea Doo supercharger shaft assembly rebuild Kit. All that is needed to rebuild the supercharger clutch back to new condition is the R&D High Performance clutch Washer Kit and the R&D 16 tooth Gear. Available summer of 2009. Description Part No. R&D RXP-X/RXT-X Supercharger 16 Tooth Gear 613-95016 R&D RXP SUPERCHARGER SLEEVE The sleeving up of the diameter of the Supercharger enables a 3.5" or 4" intake filter system to be uti- lized. The larger intake increases cubic air volume as well as decreases air inlet restriction. A win win, supercharge your supercharger and give it more air! Available in 3.5" and 4" diameters. Description Part No. RXP Supercharger Sleeve 3 1/2" Diameter 613-95035 RXP Supercharger Sleeve 4" Diameter 613-95040 10