2009 Hot Products Catalog

25 YAMAHA 4 STROKE INATKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL YAMAHA FX-SHO & FX CRUISER SHO • FUEL SYSTEM R&D FX-SHO/FZR/FZS FUEL PRESSURE REGULATOR KIT R&D offers a Yamaha FX-SHO/FZR/FZS model specific fuel pressure regula- tor system allowing custom fuel pressure tuning to the EFI fuel systems fuel pressures. The R&D Fuel Pressure Regulator System offers a wide range of setup possibilities. Base fuel pressure is adjustable from 5 to 60 PSI. The R&D fuel pressure regulator can also be set up to allow “rising rate” fuel pressure at a 1 to 1 ratio (One pound of fuel pressure gain over base for every pound of boost gain). R&D offers two types of fuel pressure regulator set ups. Part #802-00080 will come completely assembled and ready to install. The R&D Pro System is 100 percent complete, installs directly to the top of the fuel tank, and connects directly to the fuel rail with OEM security lock connectors with no modifications. For the R&D Fuel Pressure Regulator only use part #801-25010, which comes complete with 90 degree barbed brass fittings for use with push on type hose and Oetiker style clamps for security. R&D offers high performance fuel hose that can be purchased by the foot, as well as the Oetiker style clamps. The R&D bypass style regulator system is capable of handling any fuel pump up to 250 GPH. Replace “Deadhead” regulator performance and experience the full flow volume and rock steady fuel pressure that only a dynamic R&D fuel pressure regulator kit can produce. • Fuel pressure will rise on a 1:1 ratio when boost referenced • All ports are 3/8” NPT, with one inlet, 3 outlets, and one return port on the bottom • Beautiful type II bright dip anodized finish • Bypass design produces the ultimate, dynamic fuel delivery system • 3/8 pipe tapped for standard or AN fitting ready • R&D offers pre-assembled #4 AN hose to finish off a return system • R&D offers fuel hose by the foot for custom routing Description Part No. R&D FX-SHO/FZR/FZS 802-00080 Fuel Pressure Regulator Kit R&D FX SHO/FZR IN-TANK FUEL PRESSURE REGULATOR BLOCK OFF KIT R&D offers a Fuel Pressure Regulator Block off Kit which will allow the OEM stock in tank fuel pressure regulator to be removed, blocked off, and replaced with a billet part which is mandatory when installing an aftermarket externally adjustable fuel pressure regulator system. The OEM in tank fuel pressure regulator is fixed to maintain 40-43 pounds of fuel pressure at all times. For high perform- ance applications where horsepower is boosted, it is necessary to install larger flowing fuel injectors and be able to tune the fuel pressure up or down as needed. Most factory race teams are running 65 plus pounds of fuel pres- sure along with higher flowing fuel injectors and externally adjustable pres- sure regulators. The R&D has a complete line up of fuel pumps, fuel injec- tors, fuel pressure regulators, fuel gauge, and fuel hose accessories all designed specifically for the Yamaha SHO. All R&D fuel injection parts and products meet Coast Guard, I.J.S.B.A., and APBA approval. Description Part No. R&D FX-SHO/FZR/FZS In-Tank Fuel Pressure 812-35257 Regulator Block Off Kit R&D FX- SHO/FZR/FZS HIGH PERFORMANCE FUEL INJECTOR KIT When boosting the horsepower on the FX-SHO/FZR/FZS four stroke fuel injected engine, whether using high compression pistons, cams, or higher ratio supercharger compressor wheels, it will be necessary to increase the fuel flow delivery. The OEM Yamaha SHO injectors have been precision flow rate tested to be 80 percent peaked on stock units at sea level without modifications. R&D offers high performance fuel injectors with a higher atomization spray pattern that are easily capable of delivering fuel flow specifications to accommodate up to 400 horsepower! R&D has flow rate tested the O.E.M. Yamaha SHO injectors and verified them to flow 396 cc at 43 PSI of fuel pressure, which rates them to flow 30 pounds of fuel per hour. The R&D High Performance Fuel Injectors have precision flow rate tested to 525 cc at 43 PSI of fuel pressure, and 625 cc at 70 PSI of fuel pressure, which rates them to flow as much as 62 pounds of fuel per hour. R&D High Performance Injectors have been flow rate tested to perform excellent, delivering precise fuel at fuel pressure ratings ranging from 40 to 80 PSI. Each R&D High Performance Fuel Injector Kit will come packaged with vital flow test rating information that will be broken down specifically in five pound increments in fuel pressure to give the fuel flow delivery information that will help in tuning fuel pressure to match the engines fuel flow needs based on horsepower gains over stock. R&D offers only the highest quality fuel injectors, fuel pressure regulators, and fuel management accessories, for all your engine management needs. Description Part No. R&D FX-SHO/FZR/FZS High Perf. Fuel Injector Kit 812-18000 RIVA FX SHO/FZR PRO-SERIES FUEL INJECTOR KIT Riva’s high performance fuel injector kit supplies modified Yamaha 1.8 liter Supercharged engines with additional fuel for RIVA Stage II & III applications. These 95lb injectors are designed for use with RIVA Pro-Series ECU (RY11840-01-C, page 7) for correct calibration. Injector sets are flow-matched for optimum idle quality and peak performance. Description Part No. Riva FX-SHO/FZR/FZS RY12040-I-KIT Pro-Series Fuel Injector Kit R&D #4 & #6 FUEL RETURN LINE KIT R&D has developed a two larger fuel return line kits for the FX- SHO/FZR/FZS. Increasing the diameter of the fuel return line to #4 or #6, decreases line pres- sure and increases fuel volume, yielding increased tuning ability in high heat and higher perform- ance applications. Description Part No. R&D #4 Fuel Return Line 612-00082 R&D #6 Fuel Return Line 612-00083