2011 Hot Products Catalog

39 YAMAHA 4 STROKE INATKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL YAMAHA FX-SHO/FZ/VXR/VXS • FUEL SYSTEM FX-SHO/FZ/VXR/VXS 725 CC/1000 CC PRO SERIES FUEL INJECTOR KIT R&D Pro Series injectors offer increased fuel delivery over our 525cc injectors. The new Pro Series injectors are offered in 725cc and 1000cc flow rates. Each set of injectors have been flow rate and voltage comp tested to insure linear accuracy and are shipped with a precision dead time (voltage compensation) chart that can be added into your aftermarket ECU’s software program under battery compensations. R&D Pro Series injectors offer perfectly clean linear response performance from low idle all the way through the entire power range. R&D has flow rate tested the O.E.M. Yamaha FX HO injectors and verified them to flow 396 cc at 43 PSI of fuel pressure, which rates them to flow 39 pounds of fuel per hour. The R&D Pro Series Fuel Injectors have been precision flow rate tested to 725cc at 43 PSI of fuel pressure, and 925cc at 70 PSI of fuel pressure, which rates them to flow as much as 92 pounds of fuel per hour. R&D fuel Injectors perform excellent, delivering precise fuel flow at fuel pressure ratings ranging from 40 to 80 PSI. Each R&D injector set is packaged complete with all installation hardware, necessary harness interface connectors, voltage compensation chart, and instructions. Description Part No. R&D Pro-Series 725cc Injectors (set of 4) 812-18001 Flow Rate: 725cc at 43.5 Pounds of Pressure =72 Pounds Per Fuel Hour Fuel Flow. Flow Rate: 925cc at 70.0 Pounds of Pressure =92 Pounds Per Fuel Hour Fuel Flow. R&D Pro-Series 1000cc Injectors (set of 4) 812-18002 Flow Rate: 1000cc at 43.5 Pounds of Pressure =100 Pounds Per Fuel Hour Fuel Flow. Flow Rate: 1225cc at 70.0 Pounds of Pressure =120 Pounds Per Fuel Hour Fuel Flow. FX-SHO/FZR/FZS/VXR/VXS HIGH PERFORMANCE FUEL INJECTOR KIT When boosting the horsepower on the FX-SHO/FZR/FZS four stroke fuel injected engine, whether using high com- pression pistons, cams, or higher ratio supercharger compressor wheels, it will be necessary to increase the fuel flow delivery. The OEM Yamaha SHO injectors have been precision flow rate tested to be 80 percent peaked on stock units at sea level without modifications. R&D offers high performance fuel injectors with a higher atomization spray pattern that are easily capable of delivering fuel flow specifications to accommodate up to 400 horsepower! R&D has flow rate tested the O.E.M. Yamaha SHO injectors and verified them to flow 396 cc at 43 PSI of fuel pressure, which rates them to flow 30 pounds of fuel per hour. The R&D High Performance Fuel Injectors have precision flow rate tested to 525 cc at 43 PSI of fuel pressure, and 625 cc at 70 PSI of fuel pressure, which rates them to flow as much as 62 pounds of fuel per hour . R&D High Performance Injectors have been flow rate tested to perform excellent, delivering precise fuel at fuel pressure ratings ranging from 40 to 80 PSI. Each R&D High Performance Fuel Injector Kit will come packaged with vital flow test rating information that will be broken down specifically in five pound increments in fuel pressure to give the fuel flow delivery information that will help in tuning fuel pressure to match the engines fuel flow needs based on horsepower gains over stock. R&D offers only the highest quality fuel injectors, fuel pressure regulators, and fuel management accessories, for all your engine management needs. Description Part No. R&D FX-SHO/FZR/FZS/VXR/VXS High Perf. 812-18000 Fuel Injector Kit RIVA PRO-SERIES YAMAHA FUEL INJECTORS Our high impedance fuel injector kit delivers additional fuel to modified engines for high boost applications. 100lb (1,000cc) injectors are for use with aftermarket ECU (RY11840-01-C) for correct calibration. Kit includes injectors, plug and play adapters, fuel rail spacers and detailed installation instructions. Fits 2009-11 FX-SHO & FZ models. Description Part No. Riva Pro-Series Yamaha Fuel Injectors RY12040-I-KIT-100 RIVA FX SHO/FZR PRO-SERIES FUEL INJECTOR KIT Riva’s high performance fuel injector kit supplies modified Yamaha 1.8 liter Supercharged engines with additional fuel for RIVA Stage II & III applications. These 95lb injectors are designed for use with RIVA Pro-Series ECU for cor- rect calibration. Injector sets are flow-matched for optimum idle quality and peak performance. Description Part No. Riva FX-SHO/FZR/FZS RY12040-I-KIT Pro-Series Fuel Injector Kit RIVA FX SHO/FZ 3 BAR MAP SENSOR KIT Do you plan on running over 14.7psi of boost? If so, our 3 Bar MAP Sensor Kit is essential for accurate engine management with high boost applications. High quality 3 Bar MAP Sensor will measure up to 29.7psi, where the OEM 2 Bar MAP Sensor will only meas- ure up to 14.7psi. It is critical to provide accurate pressure information to your aftermarket ECU to ensure proper air/fuel mixture and data logging. RIVA 3 Bar MAP Sensor mounts directly in place of OEM sensor with stainless brack- et and plugs directly into OEM wiring harness. Description Part No. Riva FX-SHO/FZ 3 Bar Map Sensor Kit RY11740-MS-3