2013 Hot Products Catalog

182 IMPROS CUSTOM MODIFIED SOLAS IMPELLERS KAWASAKI 750/800 HOOKER IMPELLERS The Impros Hooker 140mm impeller for the Kawasaki 140mm pump is a 3 blade large hub diameter, radial edge design polished stainless steel impeller designed and intended for Bottom end and "Hook up" for freestyle and freeriders on an SXR, SXi Pro, or SX that utilizes the 140mm pump and want maximum AIR for tricks. Impros gave it this name because it "Hooks Up" so well. Designed around maximizing pump efficiency and bottom end, this is a new radial edge design, large hub, and is set back. It is a highly polished Kawasaki impeller that we will have available for the 140mm stock pump used in the SXR 800 and 750. Designed with a steep root angle to load the pump well. Material is a 17-4 stainless steel cast. Dynamically balanced, and comes polished, with a rubber nose seal. We have it available in a variety of pitches for different engine set ups. The pitches available are 9/15, 10/16 and 11/17. These numbers are much different from other impeller pitches you have heard of. While they are very low, and directed at bottom end "Hit", the root angle, blade length and other geometric differences set the Hooker apart from the others. Recommendation Part No. Stock, Limited, Maximum Bottom End IMK140915 Limited with Porting, Big Carb., More Top End IMK1401016 Closed Course Race with Pipe, Max. Hookup, IMK1401117 Added HP/Performance YAMAHA HOOKER IMPELLERS The Impros Hooker 144mm impeller for the Yamaha is a 3 blade large hub diameter (75mm), radial edge design polished stainless steel impeller designed and intended for Bottom end and "Hook up" for freestyle and freeriders on a Superjet, Blaster, or similar ski that utilizes the 144mm pump and want maximum AIR for tricks. We gave it this name because it "Hooks Up" so well. Designed around maximizing pump efficiency and bottom end, this is a new radial edge design, large hub (75mm), and is set back 7mm (4mm further than we can go with a small hub impeller). It is a highly polished Yamaha impeller that we will have available for the 144mm stock pump. Designed with a steep root angle to load the pump well. Material is a 17-4 stainless steel cast. Dynamically balanced, and comes mirror polished, with an impeller tool and rubber nose seal. Recommendation Part No. Stock, Limited, Maximum Bottom End IMY144915 Limited with Porting, Big Carb., More Top End IMY1441016 Closed Course Race with Pipe, Max. Hookup, IMY1441117 Added HP/Performance YAMAHA SUPERJET FREESTYLE IMPROS CUSTOM SOLAS SET BACK IMPELLERS Impros set back custom pitched impellers are modified to maximize bottom end and get the most air out of your ski! These impellers work with the stock pump, with & without the TBM Super Pump Cone. Race Class Description Part No. Freestyle 13/15 Solas Concord -3mm YBCD1315SB Stock/Ltd. 13/15 Solas Concord -3mm YBCD1315SB Modified 13/16 Solas Concord -3mm YBCD1316SB KAWASAKI 800 SXR IMPROS CUSTOM SOLAS SET BACK IMPELLERS Impros Set Back impellers are custom pitched to maximize performance & engine rpm for specific applications. These Solas Dynafly impellers are machined -5mm to set them closer to the pump vanes, which maximizes pump hook up. The impellers fit right into stock SXR pump. Race Class Description Part No. Freestyle 13/19 Solas Dynafly -5mm KPDF1319SB Stock 13/21 Solas Dynafly -5mm KPDF1321SB Limited 13/23 Solas Dynafly -5mm KPDF1323SB Modified 14/24 Solas Dynafly -5mm KPDF1424SB INTAKE SYSTEMS FOUR STROKE ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL ©2013 Hot Products. All rights reserved.