2013 Hot Products Catalog

20 ©2013 Hot Products. All rights reserved. INTAKE SYSTEMS SEA-DOO 4 STROKE ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL SEA-DOO 4-STROKE • ENGINE • FUEL SYSTEM ‘08 AND NEWER RIVA RISING RATE FUEL PRESSURE REGULATOR KIT RIVA’s Fuel Pressure Regulator Kits provide the precision pressure control necessary to compliment a variety of performance applications. Kits are fully assembled & mount securely via sturdy stainless steel bracket. High quality billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing one additional pound of fuel pressure for every pound of boost gain. Plugs directly into original fuel system with OEM connectors and features a large 3/8" fuel return line. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-off necessary for removal of stock fuel pressure regulator. Key Features Include: • Precision fuel pressure control with optional rising rate function. • High quality stainless steel liquid-filled pressure gauge. • Large 3/8 fuel return line. • Billet Fuel Pressure Regulator Block-off. • Easy bolt-on installation with OEM fuel connectors. • Complete installation instructions & tuning guide. Description Part No. RIVA Fuel Regulator Kit - 07 & Older 215 RS12050RRFPR07 RIVA Fuel Regulator Kit RS12050RRFPR08 08 & Newer 215/255/260 (except i-Control) ‘07 AND OLDER R&D RRFPR FUEL PRESSURE REGULATOR R&D offers a custom high performance fuel pressure regulator system designed to “bolt on” to the RXP-X/RXT-X 260. The R&D Regulator Kit comes completely assembled with all fuel lines, connectors, and fittings in place and ready to install. The R&D Kit also includes the necessary “Port Plug” to easily block off the stock in tank pressure regulator, and custom “plug on” return line fitting. The R&D regulator bracket will allow the regulator to be installed under the top deck cleanly and out of the way, yet allow fuel pressure tuning access easily accessible. Base fuel pressure is adjustable from 50 to 75 PSI with high pressure spring (installed), and can also be set up as a Rising Rate System (60-75). The R&D system is very easy to install, and all hardware can be removed and easily put back to stock at any time. Fuel rail and tank return line fittings are O.E.M. push on “snap lock” fitting connectors which will make the R&D Regulator System easy and hassle free to install. Description Part No. R&D RRFPR Fuel Pressure Regulator 803-81000 RXP-X 260 (2012-13) R&D RRFPR Fuel Pressure Regulator 803-81001 RXT-X 260/Universal for other 2008+ Sea-Doo Models R&D INLINE FUEL PRESSURE GAUGE ADAPTOR The R&D Fuel Pressure Gauge Adaptor Tool is designed to be a plug in fuel pressure gauge that needs no modifications to install and use. The adaptor installs inline between the O.E.M. fuel rail and the R&D RRFPR via the OEM connectors for easy connect and disconnect. Simply disconnect the O.E.M. locking fuel connector from the fuel rail and plug the gauge tool directly into the connector. Plug the locking connector supplied on the R&D tool onto the fuel rail and lock. Use the tool to verify fuel pressure and fuel pump condition. Use the tool to set and verify base fuel pressure settings on the R&D Rising Rate Fuel Pressure Regulator (RRFPR). When finished, disconnect the tool and reconnect the stock fuel line. The R&D Tool works on all Sea-Doo fuel systems. Installation time is only 2 minutes. Liquid filled fuel pressure gauge sold separately. Description Part No. R&D Inline Fuel Pressure Guage Adaptor 613-00190 R&D Liquid Filled Fuel Pressure Gauge 900-02180 INNOVATE LC-1 WIDEBAND AIR/FUEL RATIO KIT Description Part No. Innovate LC-1 Wideband Air/Fuel Ratio Kit 900-04378 Photo Shows 613-00190 & 900-02180