278
INTAKE
SYSTEMS
FOUR
STROKE
ENGINE/
GASKETS
EXHAUST
DRIVE LINE
HANDLING
ELECTRICAL
WATERLINE
/
BILGE
STEERING
&
CONTROLS
BODY
ACCESSORIES
SERVICE TOOLS
/
HARDWARE
CHEMICAL
©2013 Hot Products. All rights reserved.
PRO MODEL
RESCUE SLED
US Utility Patent 5,354,222 and
other patents pending.
Used by top watermen
and Rescue Professionals
for over 20 years!
•
Length: 63 inches (160cm) and 67 inches (170cm) with optional bumpers.
•
Width: 37.50 inched +/- 0.50 inches (95.25cm +/-1.27cm)
•
Thickness: 3.85 in. (10cm) at thickest point.
•
Capacity: 397 lbs.(180 kg) or two adults.
•
Weight: is approximately 42 lbs (19 kg) - sled dry weight, incudes molded
plastic hull and deck pad.
Recommended for three-seat pwcs for all types of waterborne rescue operations or recreational
activities, including tow-in surfing and spear fishing. This model has been the standard for rescue
operations around the world.
•
The tail is tapered at 2.5 inches thick
(6.75
cm) so that the sled will not have too
much flotation, and will sink a few inches
under the water while the pwc is at idle. This
feature in the Pro Model Sled allows rescue
swimmers to easily place hypothermic or
unconscious victims upon the sled deck from the water level without having to lift the victim up as one would have to
do with a sled that has too much buoyancy. The Pro Sled tail lifts back up on top of the water surface and planes
efficiently while the PWC is moving forward.
• 8
Handgrips made from 5000lb test nylon webbing, overmolded with proprietary, flexible elastomers, very durable
and resistant to the elements. Handgrips are anchored to the sled hull using 7000lb test brass mold-in inserts and
stainless fasteners. Fasteners are secured from backing out using Lock-tite.
•
Vibration Issues - The PRO Extraction Sled utilizes flexible linear low density polyethylene, flexible urethanes or EVA
copolymers as bumpers at the connecting points, and a cushioning deck pad. All of these items have been used to
reduce vibration caused from pwc motors. The Pro Sled, being a molded sled, transfers no more insignificant vibration
than any other sled on the market.
• 3/8”
thick PVC Foam Deck Pad - Very Comfortable. Durable and provides the right amount of traction. Non-slippery
like the polyethylene bodyboard foams or non textured PVC foams.
•
Basic Tie Down Version with nylon webbing/bungee cords/bumper. Utilizes universal convenient 3-point hook-up to
all makes and models of pwc. The attachments are non-invasive as they are already molded into the sled as holes for
rigging.
•
Nylon webbing and stainless spring clips are used and attached to the center main holes in the sled for the center
attachment point to the pwc, bungee cords and stainless spring clips are attached to the outboard holes for rigging.
•
U-bolts to be installed on pwc hull for mounting sled to the pwc are included (all pwcs require at least one, and up to
three of the U-bolts installed on all tie down sleds for a proper 3-point hookup (depending on pwc model). Nose of
sled is protected by the use of a replaceable bumper.
Hand Grip Color: Black is standard. Red or Yellow are optional.
Hull Color: Orange is standard. Red, Yellow, Military Green, Battleship Grey or Black are optional.
Description
Part No.
Pro Model Rescue Sled
XPROTD
3
Point Tie Down Version
We do not stock inventory of these items
–
special order only.
Tapered Tail
7000
lb Mold-in Insert
Flexible Liner
Tie Down Version
3
Point Hookup
PVC Foam Deck Mat