2014 Hot Products Catalog

45 YAMAHA 4 STROKE INATKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL ©2014 Hot Products. All rights reserved. YAMAHA FX-SHO/SVHO/FZ • INTERCOOLER R&D YAMAHA FX-SHO/FX-SVHO/FZR PRO LIMITED INTERCOOLER KIT The R&D Yamaha FX-SHO/FZ/FZR Pro Limited Intercooler Kit was developed to directly replace the restrictive OEM intercooler. The new R&D design offers high performance affordable intercooling that will bolt into the OEM stock location utilizing the OEM inlet cover, and all stock hoses and hardware. The new R&D design is IJSBA & APBA Limited Class legal, complying with rule book regulating aftermarket intercooler size. The R&D Intercooler has been specifically designed, sized, and routed to also comply with the IJSBA’s 25% rule. The Intercooler Kit is constructed from aircraft aluminum and is extremely easy to install, removes quick for cleaning and winter storage, is ultra strong, and rubber mounted so vibration will not compromise the long term performance. The R&D intercooler offers better cooling efficiency through a aluminum core design that easily out performs cheaper inefficient intercooler cores known to crack, leak and cause extreme detonation. The R&D intercooler core will flow more air, deliver better cooling efficiency, and allow C1 and C3 Monster Wheel to live up to their airflow volume and power potential. The new R&D design drastically reduces deadhead air restriction producing ultra responsive “POWER NOW” acceleration all the way through the RPM range. The R&D Pro Limited Intercooler Kit has also incorporated an integral flange which will allow the easy bolt on addition of a Greddy RZ Blow-off valve which can be adjusted to regulate boost, and compressor surge blow-off under deceleration. • Significantly improves cooling efficiency • Flows 40 CFM more than stock • Bolts directly into stock location w/oem hardware • Increases overall horsepower • Aggressive holeshot and mid range acceleration • Works great with C1 or C3 Monster compressor wheels • Retains OEM flushing system for maintenance • IJSBA. and APBA Limited Class Legal (Rule 7.8.3.) *7.8.3 AIR/FUEL DELIVERY — FOUR-STROKE (RUNABOUTS ONLY) Turbocharger impeller or supercharger impeller may be modified or aftermarket. The impeller housing must remain stock as supplied by the manufacturer. Intercoolers may be modified or aftermarket. Intercooler heat exchange surface area may not be increased by more than 25%. Description Part No. R&D Yamaha SHO/SVHO/FZ/FZR 612-18004 Pro Limited Intercooler Kit R&D FX-SHO/FZR STAGE 1 INTERCOOLER CORE KIT The R&D Yamaha FX SHO/FZR Stage 1 Intercooler Core Kit was developed to replace the over restrictive OEM intercooler with an inexpensive direct replacement core that will bolt in to the OEM stock location with all stock hardware. The R&D Intercooler Core reduces the deadhead air restriction (similar to the R&D Intake Core Kit) that is created when installing a C1 Monster compressor wheel with a 3-4 pound boost pressure gain. The R&D Intercooler offers better cooling efficiency with an aluminum 8 core design. • Flows 40 CFM more than stock • 3 pounds lighter than stock • Improves cooling efficiency • Bolts directly into stock location • Increases horsepower by reducing restrictions • Works great with C1 compressor wheel • Retains OEM flushing system for maintenance Description Part No. R&D FX-SHO/FZR/FZS Stage 1 Intercooler Core Kit 612-18001 INTERCOOLER/SUPERCHARGER LUBRICATION KIT This kit will allow you to spray a aerosol lubricant of your choice into the supercharger, intercooler and throttle body to prevent rust from the excess moisture in the system. Complete instructions, pictures and a diagram supplied for a simple installation. Description Part No. A. Yamaha/Sea-Doo Spray IWCS-SSU Nozzle Inlet for Lubrication B. Replacement Plug for Nozzle Inlet Kit IWCS-SU-P B. A.