2016 Hot Products Catalog

45 YAMAHA 4 STROKE INTAKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL ©2016 Hot Products. All rights reserved. YAMAHA FX-SHO/SVHO/FZ • FUEL HotProductsUSA.com • Orders & Info: 858-453-4454 R&D FX-SHO/SVHO/ FZR/FZS/VXR/VXS FUEL PRESSURE REGULATOR KIT R&D offers a Yamaha FX-SHO/FZR/FZS/ VXR/VXS model specific fuel pressure regulator system allowing custom fuel pressure tuning to the EFI fuel systems fuel pressures. The R&D Fuel Pressure Regulator System offers a wide range of setup possibilities. Base fuel pressure is adjustable from 5 to 60 PSI. The R&D fuel pressure regulator can also be set up to allow “rising rate” fuel pressure at a 1 to 1 ratio (One pound of fuel pressure gain over base for every pound of boost gain). R&D offers two types of fuel pressure regulator set ups. Part #802-00080 will come completely assembled and ready to install. The R&D Pro System is 100 percent complete, installs directly to the top of the fuel tank, and connects directly to the fuel rail with OEM security lock connectors with no modifications. For the R&D Fuel Pressure Regulator only use part #801-25010, which comes complete with 90 degree barbed brass fittings for use with push on type hose and Oetiker style clamps for security. R&D offers high performance fuel hose that can be purchased by the foot, as well as the Oetiker style clamps. The R&D bypass style regulator system is capable of handling any fuel pump up to 250 GPH. Replace “Deadhead” regulator performance and experience the full flow volume and rock steady fuel pressure that only a dynamic R&D fuel pressure regulator kit can produce. • Fuel pressure will rise on a 1:1 ratio when boost referenced • All ports are 3/8” NPT, with one inlet, 3 outlets, and one return port on the bottom • Beautiful type II bright dip anodized finish • Bypass design produces the ultimate, dynamic fuel delivery system • 3/8” pipe tapped for standard or AN fitting ready • R&D offers pre-assembled #4 AN hose to finish off a return system • R&D offers fuel hose by the foot for custom routing Description Part No. R&D FX-SHO/FX-SVHO/FZR/FZS/VXR/VXS 802-00080 Fuel Pressure Regulator Kit (Shown above) R&D Universal Fuel Pressure Regulator Only 801-25010 (Fittings not included) R&D-FX SHO/FZR/VXR/VXS IN-TANK FUEL PRESSURE REGULATOR BLOCK OFF KIT R&D offers a Fuel Pressure Regulator Block off Kit which will allow the OEM stock in tank fuel pressure regulator to be removed, blocked off, and replaced with a billet part which is mandatory when installing an after- market externally adjustable fuel pressure regulator system. The OEM in tank fuel pressure regulator is fixed to maintain 40-43 pounds of fuel pressure at all times. For high performance applications where horsepower is boosted, it is necessary to install larger flowing fuel injectors and be able to tune the fuel pressure up or down as needed. Most factory race teams are running 65 plus pounds of fuel pressure along with higher flowing fuel injectors and externally adjustable pressure regulators. The R&D has a complete line up of fuel pumps, fuel injectors, fuel pressure regulators, fuel gauge, and fuel hose accessories all designed specifically for the Yamaha SHO. All R&D fuel injection parts and products meet Coast Guard, IJSBA, and APBA approval. Description Part No. R&D FX-SHO/FZR/FZS/VXR/VXS 812-35257 In-Tank OEM Fuel Pressure Regulator Block Off Kit RIVA FX-SHO/FZ RISING RATE FUEL PRESSURE REGULATOR KIT RIVA Fuel Pressure Regulator Kit provides the precision pressure control necessary to compliment aftermarket ECU applications on the 'SHO' engine. Kit is fully assembled & mounts securely on top of fuel tank via sturdy aluminum bracket. High quality billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing one additional pound of fuel pressure for every pound of boost gain. Plugs directly into original fuel system with OEM connectors and features a large 3/8" fuel return line that is routed through supplied rubber fuel tank cap. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-Off necessary for removal of stock fuel pressure regulator in fuel tank. Key Features Include: • Precision fuel pressure control with optional rising rate function. • High quality stainless steel liquid-filled pressure gage. • Large 3/8” fuel return line. • Includes billet Fuel Pressure Regulator Block-Off. • Easy bolt-on installation with OEM fuel connectors. • Includes complete installation instructions & tuning guide. Description Part No. RIVA Fuel Pressure Regulator Kit RY12040-RRFPR-6S5 2008-11 FX-SHO, All FZR/FZS, FZ SVHO RIVA Fuel Pressure RY12070-RRFPR-6S5 Regulator Kit 2012 & Newer FX-SHO Models, FX SVHO R&D INLINE FUEL PRESSURE GAUGE ADAPTER The R&D Fuel Pressure Gauge Adapter Tool is designed to be a plug in fuel pres- sure gauge that needs no modifications to install and use. Simply disconnect the OEM locking fuel connector from the fuel rail and plug the gauge tool directly into the connector. Plug the locking con- nector supplied on the R&D tool onto the fuel rail and lock. Use the tool to verify fuel pressure and fuel pump condition. Use the tool to set and verify base fuel pressure settings on the R&D Rising Rate Fuel Pressure Regulator (RRFPR). When finished, disconnect the tool and reconnect the stock fuel line. The Adapter installs inline between the OEM fuel rail and the R&D RRFPR via the OEM connectors for easy connect and disconnect. The R&D Tool works on both Yamaha and Kawasaki fuel systems. Installation time is only 2 minutes. Liquid filled fuel pressure gauge sold separately. Description Part No. R&D Inline Fuel Pressure Gauge Adapter 612-00081 R&D Liquid Filled Fuel Pressure Gauge 900-02180