INTAKE
SYSTEMS
FOUR
STROKE
ENGINE/
GASKETS
EXHAUST
DRIVE LINE
HANDLING
ELECTRICAL
WATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
ADA RACING KAWASAKI 800
V2 BILLET GIRDLE HEAD & DOMES
This is ADA Racing’s V2 billet girdled head kit for Kawasaki 750/800 engines.
This girdled head uses offset base nuts and requires grinding on the outside
of the cylinder to make clearance for the girdle studs. ADA also changed to
larger diameter domes, so going from a standard bore to a big bore just
requires new domes and not a new head.
Kawasaki
Part No.
800SXR/750 V2 Girdle Head Shell
KA800M2
800SXR/750 V2 Girdle Kit
KA800G2
O-Ring Kit for KA800M2
ORKITK800BB
ADA KAWASAKI 800SXR BILLET HEAD
This head uses the stock head bolts and is completely sealed by O-rings,
no head gasket required. Dual water outlets for additional cooling. This head
will work with Factory Pipe’s 800 dry pipe.
All ADA Domes are sold individually.
Kawasaki
Part No.
800SXR/750 Girdle Head Shell
KA800M
800SXR/750 Girdle Kit
KA800G
800SXR/750 Non-Girdle Head Shell
KA800
O-Ring Kit for KA800 & KA800M
ORKITK750
Billet dome has .005” squish relief at 82.5mm (fits up to 83mm piston) with a
4˚ angle.
800 SXR - 82mm Bore Domes
Part No.
800SXR Dome 22cc (225 lbs.-114 Octane)
KA8022
800SXR Dome 24cc (216 lbs.-110 Octane)
KA8024
800SXR Dome 26cc (208 lbs.-105 Octane)
KA8026
800SXR Dome 28cc (200 lbs.-98 Octane)
KA8028
800SXR Dome 30cc (190 lbs.-95 Octane)
KA8030
800SXR Dome 32cc (180 lbs.-91 Octane)
KA8032
ADA KAWASAKI 800 SXR
LIMITED SPEC. DOMES
Billet limited drop dome for the Kawasaki 800 SX-R. These domes have a
.050” drop at 82mm for use in Limited engines with a .060” base gasket.
800 SXR - 82mm Bore Domes .50” Drop
Part No.
800SXR LTD Dome 22cc .50” Drop @ 82mm
KA8222D50
800SXR LTD Dome 24cc .50” Drop @ 82mm
KA8224D50
800SXR LTD Dome 26cc .50” Drop @ 82mm
KA8226D50
800SXR LTD Dome 28cc .50” Drop @ 82mm
KA8228D50
800SXR LTD Dome 29cc .50” Drop @ 82mm
KA8229D50
800SXR .060” Base Gasket
7040F
Billet dome has .005” squish relief at 83mm with a 4˚ angle. These domes will
not fit standard ADA head shells, as the diameter is larger than standard
domes. They are notched to fit around the head studs.
82-83mm Bore Size Domes
Part No.
V2 Head Dome 22cc
KA8322
V2 Head Dome 24cc
KA8324
V2 Head Dome 26cc
KA8326
V2 Head Dome 28cc
KA8328
V2 Head Dome 30cc
KA8330
Billet dome has .010” squish relief at 85mm with a 4˚ angle. These domes
only fit V2 Billet head shells, as the diameter is larger than ADA standard
domes. They are notched to fit around the head studs.
83.5-85mm Big Bore Size Domes
Part No.
V2 Head Dome 22cc
KA8522
V2 Head Dome 24cc
KA8524
V2 Head Dome 26cc
KA8526
V2 Head Dome 28cc
KA8528
V2 Head Dome 30cc
KA8530
V2 Head Dome 32cc
KA8532
V2 Head Dome 34cc
KA8534
Billet dome has a .050” drop at 84.5mm. Can be used with 84.5-85mm bore
size. Use with a .060” base gasket. These domes are only for use with the
ADA Racing V2 girdled head.
84.5-85mm Big Bore Size Domes .50” Drop
Part No.
V2 Head Dome 26cc .50” Drop @ 84.5mm
KA8526D50
V2 Head Dome 28cc .50” Drop @ 84.5mm
KA8528D50
V2 Head Dome 30cc .50” Drop @ 84.5mm
KA8530D50
800 SXR .060” Base Gasket
7040F
*
All V2 billet domes fit on ADA old 800SXR big bore head shell
(KA800BB, KA800M-BB)
©2017 Hot Products. All rights reserved.
138
Orders & Info: 858-453-4454 • HotProductsUSA.com
KA800M
KA800G
KA800
KA800M2
KA800G2
