2019 Hot Products Catalog

TBM RACING BILLET SX-R EXHAUST FLANGE Kawasaki 800 SX-R and 1500 SX-R Part No. Black TBM110 Silver TBM110-P HotProductsUSA.com • Orders & Info: 858-453-4454 59 KAWASAKI 1500 SX-R INTAKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE INDEX © 2019 Hot Products. All rights reserved. KAWASAKI 1500 SX-R • INTAKE • COOLING • EXHAUST RIVA RACING POWER FILTER KIT RIVA Power Filter feeds your 1500 SX-R engine with a steady diet of cool air delivering greatly improved acceleration and RPM. This system draws cool air from front of engine compartment near factory hull vents. Replaces restrictive stock air box with a high volume, precision-formed intake tube. Cool air enters the system via an oversized K&N filter element. Description Part No. RIVA Power Filter Kit, 1500 SX-R RK13110 Waterproof Pre Filter for RK13110 RS13050-PF-BLK *RIVA replacement filters are available for all RIVA Power Filter Kits, see page 65 for the RIVA Replacement Flame Arrestor Chart WORX 1/2” THROUGH HULL FITTING Description Part No. 1/2” Through Hull Fitting WR06004 R&D HIGH FLOW REAR EXHAUST KIT The R&D SXR 2.250” High Flow Rear Exhaust Kit is a “Must Have” kit for bet- ter Holeshot and Top End Performance! The high flow kit is designed to be used with the High Performance power adders like camshaft kits, and 14-1 Piston kits. The R&D Kit will add a huge difference in “holeshot” low end and midrange accelerations by eliminating exhaust back pressure. The kit also comes complete with a guide fixture needed to cut and gut out the stock restrictive water box. R&D has chosen to modify the stock water box, and maintain the oem exhaust routing to keep water out of the engine in case there is that occasional tip over or rollover, your engine will not get “Swamped” with water that can be catastrophic! OPEN CLASS FOR MODIFIED WATERBOX Description Part No. High Flow Rear Exhaust Kit 331-81511-SIL 660-81500 660-82501 R&D WATER BOX BYPASS KIT The Water Box Bypass Kit adds a nice boost in throttle response and acceler- ation, as well as promotes stronger midrange pulling power! The R&D kit is a quick and simple to install kit that works to reduce the amount of water that is being “Pumped” into the Water Box. The amount of overall water to the box is restricted or reduced while still maintaining plenty of water to keep the water box and exhaust hoses cool. This kit is without doubt, one of the most notice- able 5 minute bolt-on Power Adders available for the SXR! Description Part No. Water Box Bypass Kit 660-81501 R&D RACING PERFORMANCE ENGINE COOLING KIT The Kawasaki SX-R’s stock engine cooling will quickly become inadequate in High Performance arena where Higher Compression Pistons and Camshaft kits, and aggressively timed ECU Packages are installed and used! The R&D Cooling kit for the SXR is very similar to the popular R&D Ultra 310R kit, where Engine Temperature and Oil Temperatures are addressed, and greatly reduced. The R&D’s “Billet” Multi-Port Extra Cooling Block replaces the OEM cooling block mounted to the pump, and allows for an additional Cooling Line (or additional lines) to be added. The R&D Kit adds an additional line direct to the engine which will reduce engine temperatures and also redirects water flow through the Oil Cooler to reduce oil temperatures. The Kit also works to reduce the amount of water being “Pumped” into the Water Box to ADD Throttle Response, as well as maintain higher top speed averages by getting ride of engine heat fade. *All ports on the water manifold block are 1/4” MNPT threaded female connections. See page 323 for Brass fittings. Description Part No. Engine Cooling Kit, 1500 SX-R 660-81500 5 Port Cooling Manifold Block only (no fittings included) 660-82501