2022 Hot Products Catalog

Index Service Tools & Hardware Accessories Body Steering & Controls Cables Waterline & Bilge Electrical Driveline Handling Exhaust Engine & Gaskets Intake Systems Four Stroke ENGINE & GASKETS Orders & Info: 858-453-4454 • HotProductsUSA.com 164 © 2022 Hot Products. All rights reserved. ADA KAWASAKI HEAD & DOMES ADA RACING KAWASAKI 800 V2 BILLET GIRDLE HEAD & DOMES This is ADA Racing’s V2 billet girdled head kit for Kawasaki 750/800 engines. This girdled head uses offset base nuts and requires grinding on the outside of the cylinder to make clearance for the girdle studs. ADA also changed to larger diameter domes, so going from a standard bore to a big bore just requires new domes and not a new head. Kawasaki Part No. 800SXR/750 V2 Girdle Head Shell KA800M2 800SXR/750 V2 Girdle Kit KA800G2 O-Ring Kit for KA800M2 ORKITK800BB ADA KAWASAKI 800SXR BILLET HEAD This head uses the stock head bolts and is completely sealed by O-rings, no head gasket required. Dual water outlets for additional cooling. This head will work with Factory Pipe’s 800 dry pipe. All ADA Domes are sold individually. Kawasaki Part No. 800SXR/750 Girdle Head Shell KA800M 800SXR/750 Girdle Kit KA800G 800SXR/750 Non-Girdle Head Shell KA800 O-Ring Kit for KA800 & KA800M ORKITK750 Billet dome has .005” squish relief at 82.5mm (fits up to 83mm piston) with a 4˚ angle. 800 SXR - 82mm Bore Domes Part No. 800SXR Dome 22cc (225 lbs.-114 Octane) KA8022 800SXR Dome 24cc (216 lbs.-110 Octane) KA8024 800SXR Dome 26cc (208 lbs.-105 Octane) KA8026 800SXR Dome 28cc (200 lbs.-98 Octane) KA8028 800SXR Dome 30cc (190 lbs.-95 Octane) KA8030 800SXR Dome 32cc (180 lbs.-91 Octane) KA8032 ADA KAWASAKI 800 SXR LIMITED SPEC. DOMES Billet limited drop dome for the Kawasaki 800 SX-R. These domes have a .050” drop at 82mm for use in Limited engines with a .060” base gasket. 800 SXR - 82mm Bore Domes .50” DropPart No. 800SXR LTD Dome 22cc .50” Drop @ 82mm KA8222D50 800SXR LTD Dome 24cc .50” Drop @ 82mm KA8224D50 800SXR LTD Dome 26cc .50” Drop @ 82mm KA8226D50 800SXR LTD Dome 28cc .50” Drop @ 82mm KA8228D50 800SXR LTD Dome 29cc .50” Drop @ 82mm KA8229D50 800SXR .060” Base Gasket 7040F Billet dome has .005” squish relief at 83mm with a 4˚ angle. These domes will not fit standard ADA head shells, as the diameter is larger than standard domes. They are notched to fit around the head studs. 82-83mm Bore Size Domes Part No. V2 Head Dome 22cc KA8322 V2 Head Dome 24cc KA8324 V2 Head Dome 26cc KA8326 V2 Head Dome 28cc KA8328 V2 Head Dome 30cc KA8330 Billet dome has .010” squish relief at 85mm with a 4˚ angle. These domes only fit V2 Billet head shells, as the diameter is larger than ADA standard domes. They are notched to fit around the head studs. 83.5-85mm Big Bore Size Domes Part No. V2 Head Dome 22cc KA8522 V2 Head Dome 24cc KA8524 V2 Head Dome 26cc KA8526 V2 Head Dome 28cc KA8528 V2 Head Dome 30cc KA8530 V2 Head Dome 32cc KA8532 V2 Head Dome 34cc KA8534 Billet dome has a .050” drop at 84.5mm. Can be used with 84.5-85mm bore size. Use with a .060” base gasket. These domes are only for use with the ADA Racing V2 girdled head. 84.5-85mm Big Bore Size Domes .50” Drop Part No. V2 Head Dome 26cc .50” Drop @ 84.5mm KA8526D50 V2 Head Dome 28cc .50” Drop @ 84.5mm KA8528D50 V2 Head Dome 30cc .50” Drop @ 84.5mm KA8530D50 800 SXR .060” Base Gasket 7040F * All V2 billet domes fit on ADA old 800SXR big bore head shell (KA800BB, KA800M-BB) KA800M KA800G KA800 KA800M2 KA800G2